How to connect a barcode scanner to 1s?
- 23.11.2022
How to quickly connect a barcode scanner to 1C?
Barcode scanners are widely used by cashiers and other employees to work with products. Thanks to a modern device, it is easy to keep records and inventory of marked goods. For this, labels made on special devices are pasted on them. It will be useful to know what a thermal transfer printer is.
Technological equipment increases work efficiency and significantly saves time. For even greater comfort and work optimization, you need to know how to connect the scanner to the 1C program. There is nothing difficult to install and configure the device. To do this, you just need to follow a few simple steps. We will help you connect a barcode reader.
A few steps to connect the scanner
We will provide a short instruction on how to quickly connect the device. There are several ways to connect a barcode scanner to 1C. It all depends on the type of device you have purchased. The scanner can be connected in several ways:
- Connect with keyboard break.
- Connect via COM port.
- Connect to a computer using a USB port.
If you have a device that connects to your computer using USB, you need to install a special driver before proceeding further. This is done in COM port or keyboard emulation mode. To start this system, you need to scan the barcodes. After that, the installation of the necessary driver will start. Be careful, because your COM port will appear in the devices, and you will need to write down its number. After that, a connection to the computer is made, and you can start setting up the device for 1C. Here we will need the number that you wrote down, because the program is designed to use the COM port mode to connect the scanner. Our emulator helps with this. Next, we do everything step by step, and you will quickly understand how to connect a barcode scanner:
- Click on the "Connected Equipment" button in the "Sales" category and put the desired checkbox.
- Select the item "Connected equipment" and select a barcode scanner. Click "Create" and add data about our device.
Next, a window appears, in which, as a rule, data about the stroke device is automatically filled in. Optionally, you can fill in the serial number of the device, which is located on it. Before starting work, it is better to test the device. To do this, read any barcode that should then appear in the program.
I hope we have helped answer the question of how to connect a barcode scanner to a computer. Now you can easily scan any label and display the results in 1C, regardless of the printer on which the label was made. We also recommend learning how to choose a thermal transfer printer.